Chip & Crack Repair

The Heritage Coatings chip and crack repair process is straightforward, efficient, and designed for same-day completion. We begin with a thorough assessment of the damage to determine the best repair approach. We evaluate the material type, the size and depth of the damage, whether moisture has reached the substrate, and whether the surrounding area shows any signs of additional deterioration. For standard chips and small cracks, the repair process begins with cleaning and drying the damaged area completely. We then apply professional-grade filler compounds specifically formulated for bathroom fixture repair. These fillers are two-part catalyzed compounds that cure to a hard, waterproof surface, not the hardware-store putties and patch kits that soften and discolor over time. We build up the filler in thin layers, shaping each layer to match the original contour of the fixture. Once the filler has cured, we sand it smooth, blending the edges seamlessly into the surrounding surface. Finally, we color-match and apply a finish coat that blends the repair into the existing surface. For porcelain and glossy surfaces, we use a gloss-matched topcoat. For matte or textured surfaces, we match the existing texture. The goal is a repair that is virtually invisible to the eye and completely sealed against moisture. For single chips, the entire process typically takes under an hour, and the surface is usable almost immediately after the final coat cures. For multiple chips, larger cracks, or stress cracks that follow the contour of the fixture, the repair may take several hours. For extensive or widespread damage, we may recommend a full refinish rather than spot repairs to ensure the best long-term result and appearance.

Heritage Coatings uses professional-grade repair materials that are specifically designed for bathtub and shower fixture restoration. Our filler compounds are catalyzed polyester and epoxy systems that cure to a hard, waterproof, sandable surface. They bond tenaciously to porcelain, fiberglass, acrylic, cultured marble, and cast iron substrates. Our color-matching system allows us to blend repairs into virtually any existing fixture color, from bright whites and off-whites to almond, bone, biscuit, and custom colors. The finish coats we apply are the same professional-grade acrylic urethane coatings we use for full refinishing projects, ensuring that the repair area has the same durability, chemical resistance, and appearance as the surrounding original surface or a full refinish. We do not use consumer-grade bathtub repair kits, nail polish, or touch-up paints that yellow, soften, or peel within months.

Chip and crack repair starting at $289 is the most budget-friendly professional bathroom fixture service Heritage Coatings offers. The price depends on the number of repair points, the size and complexity of the damage, and the material being repaired. A single chip repair on a standard white porcelain tub is at the lower end of the range. Multiple chips, larger cracks, or custom color matching may cost more. Even at the higher end, repair costs are a small fraction of replacement. A new bathtub installed costs $3,000 to $7,000. A new shower replacement runs $4,000 to $8,000. Repair saves 90 to 95 percent compared to replacement for localized damage. For landlords and property managers dealing with tenant damage, chip repair is the fastest and most cost-effective way to address the issue and maintain the condition of the unit. For homeowners preparing to sell, repairing visible chips and cracks in bathroom fixtures removes a common buyer objection at minimal cost.

Montana's climate contributes to some of the conditions that cause chip and crack damage in bathroom fixtures. The dry air during the heating season can cause materials to become more brittle. Temperature swings, especially in bathrooms on exterior walls, create thermal expansion and contraction cycles that stress fixture surfaces. Hard water, common in many Montana communities, leaves mineral deposits that homeowners scrub at with abrasive cleaners, gradually weakening the surface glaze and making it more susceptible to chipping. Heritage Coatings understands these Montana-specific factors and repairs fixtures with materials and techniques chosen for long-term performance in local conditions.

Chip and crack repair serves a wide range of customers. Homeowners with a single chip or crack that bothers them every time they step into the tub choose repair for a fast, affordable fix. Landlords and property managers use our repair service to address tenant-caused damage quickly between turnovers. Real estate agents recommend chip repair as a low-cost way to address buyer concerns during the selling process. Airbnb and vacation rental operators fix chips and cracks promptly because visible damage in bathroom photos hurts bookings and reviews. Property maintenance companies and commercial facility managers call us for quick repairs to hotel, motel, and assisted living bathroom fixtures. Heritage Coatings handles jobs of all sizes, from a single chip in a family bathroom to a batch of repairs across multiple units in a commercial property.

Every chip and crack repair from Heritage Coatings comes with our 3-year warranty covering the repair area. If your tub or shower has extensive cracking, widespread discoloration, or damage that goes beyond what spot repair can address, ask about our full bathtub refinishing or shower refinishing services for a complete surface restoration that covers the entire fixture. We are always honest about whether a repair or a full refinish is the better approach for your situation.

Heritage Coatings provides chip and crack repair throughout Montana. Our service area includes Helena, Bozeman, Missoula, Great Falls, Billings, Butte, Kalispell, Whitefish, Livingston, Belgrade, Hamilton, and surrounding communities across western and central Montana. Same-day service is available for most repair projects. Call Heritage Coatings at (406) 438-4288 for a free assessment, or request a quote online.